Services
| X-Ray Eyes your #1 Thermal imaging company in South Dakota that offers many different services for the every day person owning a house or the buyer thinking about buying that first house and needs to know how the insulation is and if there is any moisture issues present. If you are the everyday person with a house issue weather it be cold air drafts you don’t know where they are coming from or the moisture issue that just showed up in your finished basement after a two inch rain. X-Ray Eyes can help you out and find the exact point of the problem with out tearing apart your house helping you save money on construction costs. If you have infloor heat in your house and you are loosing fluid because of a leak and don’t know how to find it without ripping up the floor give us a call we can find the leak with in the inch. Or if you have infloor heat in the basement but never finished it and now its time to getter done but you forgot to run the Power and Water out to that wet bar you always wanted. Give us a call and we can come out and mark out the tubing in the concrete so you can have your contractor of choice come out and cut between the tubing so you don’t have repair any of your infloor heat system saving you time, money and a headache. | |
 more photos |
|
|
|
|
| For that 24/7 operation X-Ray Eyes is the only PDM Company that you can trust to help reduce your downtime. By letting our company come in we can sit down with your operations manager and discuss your facilities needs. We can take a look at what you have and help you set up yearly, quarterly, or semiannually routes. We scan all of your electrical from the incoming power down to that lighting panel finding those phase imbalances to overloaded circuits causing your facility to pay a higher utility bill. The reason it is so important to find those electrical issues is because they cause downtime when the fail and 90% of all fires are electrical and most of the time catastrophic. We can also set up a mechanical route helping you find hot bearings, gearboxes, and motors that maybe going bad. This way you can catch the equipment before it fails and get the equipment to the next scheduled shut down without interruption. | |
  more photos |
|
|
|
|
| If you already have a PDM program set up at your facility we can come in and take a look at your routes to get a fresh eye on the situation. By doing this we can make recommendations making your program more efficient which in turn puts more money back into operations. This can be anything from how you prioritize your findings and schedule a follow up inspection to make sure the work was done right to making sure appropriate procedures and policies are being followed. If you are looking to set up consulting services give us a call and we can set up an appointment to come out and discuss further. | |
  more photos |
|
